Source selection for channels…

[Mixed]

Would like to see optional screen to change channel sourcing. Currently need to select any input channel and choose source at lower left of display…would like to maybe also have this on Routing screen, which seems like it would make sense being a routing issue. Few times I have had to do an extra button push to select a channel vs just go right to Routing screen.

Thank you…

enjoying the qu-24/AR2412

[jakethepeg]

Yes please..!

[SteffenR]

no please, free routing would be good but the position of the screen is ok

[Mixed]

Glad you mentioned this…after re-reading how I wrote the request, it sounds like I want an optional screen altogether!

What I meant was I would like to be able to access the channel sources from the routing screen, in addition to where it currently is. The routing button screen just makes sense to have channel routing listed there as well.

[SteffenR]

a dedicated patch screen would be helpful at all

[Anonymous]

A dedicated patch screen from Routing would be helpful AS WELL
So you can get to the patch screen both ways

[MarkPAman]

Have to admit, that it took me quite a long time to get the hang of where to find the input selection, and I still occasionally go to the Routing screen before I remember. It would seem the natural place to find it.

[Mixed]

exactly, that is what I am referring to. 🙂

[fxk]

I agree. The current setup (console AND iPad app) are far from intuitive.

[Author]

Posts