Single faders for combined channels

Forums Forums GLD Forums GLD feature suggestions Single faders for combined channels

This topic contains 4 replies, has 3 voices, and was last updated by Profile photo of GerMan GerMan 5 years, 2 months ago.

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • #57729
    Profile photo of GerMan
    GerMan
    Participant

    I would wish that one can group in pairs input channels (e.g., 11/12 or 15/16) to a stereochannel like with dLive, thus only one single fader must be used.

    Attachments:
    You must be logged in to view attached files.
    #57731
    Profile photo of MikeShand
    MikeShand
    Participant

    Use Ganging? Or a DCA.

    #57732
    Profile photo of GerMan
    GerMan
    Participant

    However, Ganging still uses two faders and combines any parametres with these. However, only a single physical fader should be used. With it one has on the GLD80 more place for different input channels with stereo-signals.

    #57733
    Profile photo of cornelius78
    cornelius78
    Participant

    You can choose which parameters are and aren’t linked in the gang, and you can bury one of the faders on another layer, or even un-assign it from the surface completely (once you’ve set its pan.)

    #57741
    Profile photo of GerMan
    GerMan
    Participant

    Thanks! This I have already considered. However, it is not so comfortable. 🙁

Viewing 5 posts - 1 through 5 (of 5 total)

The forum ‘GLD feature suggestions’ is closed to new topics and replies.