Topic: Setting a default gain for multiple scenes | Allen & Heath Digital Community

Setting a default gain for multiple scenes

Tagged: gain, preamp, Scenes, Theatre

This topic contains 2 replies, has 3 voices, and was last updated by Wolfgang 2 years, 3 months ago.

Viewing 3 posts - 1 through 3 (of 3 total)

Author

Posts
2022/01/03 at 9:23 pm #105204

Woopsiedaisy
Participant

I have a show with 60+ scenes where appropriate gain levels for multiple actors were not defined when making the scenes

So now i have the problem that i need to set a gain level that is correct for the whole show. Could i do this by updating and adjust the gain there for all scenes?

2022/01/04 at 12:20 am #105208

RS
Participant

Can be done very easy with the update function under scenes.
Refer to the manual for details…

2022/01/14 at 6:16 pm #105377

Wolfgang
Participant

If you need to do it quickly, you can also switch the preamps to Recall Safe.
Then the preamps are not recalled by scenes.
Author

Posts

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.