Scene Recall Filter for Input Patch does not work

Forums Forums SQ Forums SQ troubleshooting Scene Recall Filter for Input Patch does not work

Tagged: , ,

This topic contains 3 replies, has 2 voices, and was last updated by Profile photo of Edi Edi 2 weeks, 6 days ago.

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #102280
    Profile photo of Edi
    Edi
    Participant

    I‘m playing with the latest firmware V1.5.4.

    I wanted to save scenes for switching between USB Inputs for virtual soundcheck and others for switching between local IO or SLink. For each of the scenes I set a recall filter where I blocked all except Input Patch.

    Although I saved each scene correctly with the Inputs patched appropriate, recalling them does nothing. Input patch remains as it was before recalling.
    No global filters set at all.

    #102281
    Profile photo of Edi
    Edi
    Participant

    When I also allow „Preamp“, it works…

    I think this is not as it is supposed to work…

    #102291
    Profile photo of SteffenR
    SteffenR
    Participant

    since you switch between “preamps” and other inputs I guess you have to enable the preamps to make it work…

    it is not simple to configure this…

    #102349
    Profile photo of Edi
    Edi
    Participant

    I understand what you mean, but it’s a little bit misleading…

Viewing 4 posts - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.