Qu usb recording high disk usage with Logic Pro

Forums Forums Qu Forums Qu general discussions Qu usb recording high disk usage with Logic Pro

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #95286
    Profile photo of DeanDean
    Participant

    Hi folks
    So I was doing a 8 channels multi-tracks live recording with Qu-16 with Logic Pro
    and there the HD bar keep peaking and stop recording from time to time with that disk too slow message
    I am already using an external SSD hard drive. And my colleague had the same problem with his Qu-24 too, which he has no problem recording with a Dante but can’t do it with usb. And he had no problem after switching to Wave Tracks Live. Is it a sample rate problem? Or problems with Logic Pro and Qu mixers? Any thoughts?

    My mac spec:
    Mid 2015 MBP / IOS 10.13.6 / 16gb DDR3 memory
    The project is 24bit 44.1

    #95287
    Profile photo of KeithJ A&HKeithJ A&H
    Moderator

    @Dean,

    The Qu runs at 48kHz, so a project at 44.1kHz requires sample rate conversion to be carried out by the computer.
    This can cause the ‘disk too slow’ message with Logic, which is quite a resource-hungry program as-is (unlike Tracks Live).
    Please try running a project at 48kHz to see if this helps.

    Thanks,
    Keith.

Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.