QU-24 firmware update V1_82_4387

Forums › Forums › Qu Forums › Qu troubleshooting › QU-24 firmware update V1_82_4387

This topic contains 1 reply, has 2 voices, and was last updated by Profile photo of Dick Rees Dick Rees 8 years, 1 month ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • 2016/02/29 at 4:11 pm #54302
    Profile photo of jouko.hilden
    jouko.hilden
    Participant

    Does any one have any problems after Qu24UpdtV1_82_4387 update?
    I update my QU-24. First that looks at there are no problems but…
    Middle of the next gig, I could not listen (Headphones) anymore any Mix 1 – 6 (aka monitors)? Everywhere was same mix than L+R….
    Meanwhile, routing went nut… All monitors listen only Chanel 10 (this time lead vocals…)

    I checked several times all routings and set up but did not found any mistake…

    Am I crazy (that´s also possible…) or can be a problem with the device / firmware update?

    2016/02/29 at 8:25 pm #54311
    Profile photo of Dick Rees
    Dick Rees
    Participant

    Try a hard reset of the board. If that doesn’t fix it, do a new download of the firmware. Make sure your USB stick is one of the approved models properly formatted. It’s best to use a stick with nothing else on it and double check the formatting.

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.