Newbie using an ME1 system

Forums Forums dLive Forums dLive General Discussions Newbie using an ME1 system

This topic contains 2 replies, has 3 voices, and was last updated by Profile photo of Dave Dave 1 year ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
  • #102303
    Profile photo of gerbermary

    Hi all and thank you for your consideration.

    I’m brand new to navigating digital audio boards. I get along on the input side but I’m lost sending to wedge monitors and I now have the ME1 system. My highest priority right now is how do I get my instruments and vocals to show up on the ME1? Please remember I’m new to this and I’m teaching myself so laymen’s terms if possible. I can navigate the ME1s pretty well it’s just getting the channels there.


    Profile photo of Wolfgang

    So I had this information from the operating instructions and then very quickly got to grips with it.
    That’s why I would recommend reading the manual first. If you still have questions, you are welcome to ask them again.

    Profile photo of Dave

    It’s the “ME” section, under the “Outputs” tab on the I/O screen.

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.