MIDI Parameters / Documentation

Forums Forums SQ Forums SQ general discussions MIDI Parameters / Documentation

This topic contains 4 replies, has 3 voices, and was last updated by Profile photo of KeithJ A&H KeithJ A&H 8 months, 1 week ago.

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • #101186
    Profile photo of Dave Meadowcroft
    Dave Meadowcroft
    Participant

    I’m writing some MIDI software to create some customised controls and whilst modeling the SQ in oode from SQ MIDI Protocol Issue 3 I’ve come across a couple of anomalies. I’m not at my console to test so checking with SQ MixPad Offline.

    These parameters are listed but they would appear to be invalid:
    Level Parameters

    • FX Returns to Groups – actually controlled by FX Returns to LR with different MSB/LSB?

    Balance Parameters

    • FX Returns to Groups – actually controlled by FX Returns to LR with different MSB/LSB?
    • FX Sends to Output – is there a Pan available on the FX Send master?
    #101546
    Profile photo of nottooloud
    nottooloud
    Participant

    Interesting. Have you had a chance to confirm on a console?

    #101553
    Profile photo of Dave Meadowcroft
    Dave Meadowcroft
    Participant

    Not yet unfortunately!

    #113659
    Profile photo of Dave Meadowcroft
    Dave Meadowcroft
    Participant

    I’ve finally got around to looking into MIDI control again.
    Still not tested the parameters I mentioned before, but here is the detail in the current version (Issue 4), plus a couple of other mistakes I’ve spotted.

    Are these invalid?
    Page 23: Level Parameter Numbers – FX Returns to Groups
    Page 26: Balance Parameter Numbers – FX Returns to Groups
    Page 27: Balance Parameter Numbers – Master Sends: FX Sends to Output

    Other Errors
    Page 9: 3.1 Scene change Examples
    The last example has the MIDI channel wrong for the Program Change (should be C2, not C0)
    Page 21: Mute Parameter Numbers – Inputs to LR/Aux
    Matrix to Output has Mtx1 listed 3 times instead of Mtx1 00 55, Mtx2 00 56, Mtx3 00 57

    #113668
    Profile photo of KeithJ A&H
    KeithJ A&H
    Moderator

    @dave Meadowcroft

    Thanks for reporting these and apologies I missed it first time around.
    We may have gone MIDI-blind.
    I’ll check them out and we’ll update documentation as required.

    Thanks,
    Keith.

Viewing 5 posts - 1 through 5 (of 5 total)

You must be logged in to reply to this topic.