Make Dyn EQ and MultiBD addressable as 2 x mono processors

Forums Forums SQ Forums SQ feature suggestions Make Dyn EQ and MultiBD addressable as 2 x mono processors

Viewing 15 posts - 1 through 15 (of 27 total)
  • Author
    Posts
  • #100086
    Profile photo of DavidledgerukDavidledgeruk
    Participant

    Please could you make the Dyn EQ and MultiBD plugins insertable as 2 x mono processors as well as a stereo processor like on iLive?

    I was a tad disappointed that I could only use them as inserts on only one vocal when I had previously been connecting 2 vocals to either side of one unit.

    #100801
    Profile photo of WillyWilly
    Participant

    Yes, I have the same issue with my Sq7 as well.

    I would like to know how to insert “SQ-7 Dynamic Trio Pack” into 5 to 8 FX Rack in order to use it Insert it in to any input channel, group or Mix out just like the one I am using from the Rack 1 to 4.

    Thanks

    #101602
    Profile photo of Valentyn LValentyn L
    Participant

    +1
    It’ll be cool to use fx unit for 2 mono channels

    #108329
    Profile photo of SoundaveSoundave
    Participant

    +1

    #108360
    Profile photo of TobiTobi
    Participant

    +1

    #108404
    Profile photo of soundguybobsoundguybob
    Participant

    +1, this would be FANTASTIC!!!

    #108535
    Profile photo of SchuifRobSchuifRob
    Participant

    +1!

    #108631
    Profile photo of TobiTobi
    Participant

    (same suggestion for Transient Controller :-))

    #108635
    Profile photo of BrianBrian
    Participant

    (same suggestion for Transient Controller :-))

    I haven’t used the SQ (and perhaps it is different), but on the Avantis you can set the Transient Controller to be two mono inserts. I use only one FX rack slot and have the transient controller on both the kick and snare.

    #108650
    Profile photo of Gregg GreyGregg Grey
    Participant

    +1
    For sure it could be great !!!!!

    #109219
    Profile photo of FuHnFuHn
    Participant

    Yes please, +1! It worked really well on e.g. the Insert Stuff on the GLD and would also be helpful on the SQ.
    Is there a technical reason that was implemented like that already?

    #109302
    Profile photo of TimmyPTimmyP
    Participant

    Agree – stereo or dual mono, freely patchable.

    #109348
    Profile photo of lightingman117lightingman117
    Participant

    +1

    DeEsser

    #114197
    Profile photo of RaphouRaphou
    Participant

    +1

    It would be realy nice to be able to do this at least on all plugins of the Dynamic Trio Pack.

    #114394
    Profile photo of Gregg GreyGregg Grey
    Participant

    +1
    This is a necessity !!!!

Viewing 15 posts - 1 through 15 (of 27 total)
  • You must be logged in to reply to this topic.