LUFS metering

Forums Forums SQ Forums SQ feature suggestions LUFS metering

This topic contains 4 replies, has 4 voices, and was last updated by Profile photo of volounteer volounteer 1 month, 1 week ago.

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • #101253
    Profile photo of John@CreechBC
    John@CreechBC
    Participant

    With increased prevalence of live streaming of church services, is it possible to add LUFS metering to the SQ range?

    #101256
    Profile photo of volounteer
    volounteer
    Participant

    +10E999999999

    We absolutely need visual metering that does LUFS but also more
    and far better than a few widely spaced LED readouts
    so we can meet local laws on sound levels in venues or locales as well as those
    on AM/FM and the requirements of CDNs like utoob facebook itunes et al

    It could be an add on that plugs into the mixer if AH does not think it popular enough for all to have it built in.

    #101258
    Profile photo of Bracumba
    Bracumba
    Participant

    TC Electronics makes a very nice and complete metering unit; Clarity M. You can hook it up via the AES output of the SQ (among other ways) I love it 🙂

    #101260
    Profile photo of Hugh
    Hugh
    Participant

    My Studio One DAW has wonderful LUFS metering in the project page. Most streaming is delayed a little bit for many reasons so processing a finished mastered two mix thru the DAW should present no streaming problem and there is a huge advantage in producing a high quality mastered recording at the same time.
    Hugh

    #101261
    Profile photo of volounteer
    volounteer
    Participant

    OBS can run a VST that shows LUFS

    The issue is to have a cheaper better easier faster way to determine exact SPL levels , DR, and durations on the mixer before the streaming gear.

Viewing 5 posts - 1 through 5 (of 5 total)

You must be logged in to reply to this topic.