Insert link/gang

Forums › Forums › dLive Forums › dLive feature suggestions › Insert link/gang

This topic contains 3 replies, has 4 voices, and was last updated by Profile photo of ThisIsAnAudioAccount ThisIsAnAudioAccount 3 months, 4 weeks ago.

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • 2023/06/18 at 10:19 am #113375
    Profile photo of Wassingue
    Wassingue
    Participant

    Would it be possible to link the same inserts as with the gang, especially the DYN8s?
    Indeed, dance companies like to have left and right faders separately, like center, subs, surrounds…
    It would be more convenient than copy/paste.

    2024/01/04 at 9:37 pm #118064
    Profile photo of Erik
    Erik
    Participant

    +100

    When using DYN8 on ganged CH, L/R (on separate faders), or ganged MTXs the channel being changed does not affect the linked/ganged channel, so you have to “listen with one ear” then copy/paste to the other channel. Seems an easy fix…. perhaps?

    2024/01/05 at 4:02 pm #118085
    Profile photo of RuneS
    RuneS
    Participant

    Linking parameters is all well and good (better than nothing for sure), but gain reduction needs to be linked too. This is an issue with ganged dynamics in general.

    2024/01/05 at 5:33 pm #118094
    Profile photo of ThisIsAnAudioAccount
    ThisIsAnAudioAccount
    Participant

    +1. Mic’d stereo sources are typically ganged to allow separate preamp settings. Have been having to copy and paste as well.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.