i/o card not fitted

Forums › Forums › SQ Forums › SQ troubleshooting › i/o card not fitted

This topic contains 2 replies, has 2 voices, and was last updated by Profile photo of nottooloud nottooloud 7 months, 1 week ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • 2023/09/29 at 6:34 pm #115253
    Profile photo of nottooloud
    nottooloud
    Participant

    Pair of new SQ Dante cards. Either one in my SQ6, the lights on the card come on, but on the board Setup-I/O Port shows nothing and says i/o card Not Fitted. Dante Controller only sees my laptop.

    2023/09/29 at 6:38 pm #115254
    Profile photo of Brent H.
    Brent H.
    Participant

    I assume you have the latest firmware in your SQ? It looks like the latest firmware adds support for V3 of the Dante cards.

    2023/09/29 at 6:51 pm #115255
    Profile photo of nottooloud
    nottooloud
    Participant

    Of course that was it.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.