How to add or incorporate reverb from a channel into a Mix

Forums Forums Qu Forums Qu general discussions How to add or incorporate reverb from a channel into a Mix

This topic contains 3 replies, has 4 voices, and was last updated by Profile photo of Mike C Mike C 1 month, 2 weeks ago.

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #102060
    Profile photo of Wes
    Wes
    Participant

    Re QU-24: The horn players in our band want to hear more reverb from their instruments in their dedicated monitor Mix. How do I do this without affecting the reverb levels of the Main LR or the other monitor Mixes?

    #102265
    Profile photo of Jakes Olivier
    Jakes Olivier
    Participant

    Hi there. You can do this on the Qu32: (i’m sure it’s the same for the Qu-24)

    1. Select their mix (for example mix 1)
    2. Then select the “layers” button
    3. Then find FX 1 return, FX 2 return, etc. faders
    4. Bring the specific fader up and this will send that effect to mix 1 (their monitor)

    Hope that helps.

    #107227
    Profile photo of Dings
    Dings
    Participant

    The Fx should be post fader and go to the layer of their monitors and push the fx return fader to the amount of fx needed

    #107228
    Profile photo of Mike C
    Mike C
    Participant

    Think of the FX return channels just like any input channel, they have the same
    routing and mixing functions available.

    Just don’t send an FX return back into itself by bringing up it’s FX send on the FX return.

Viewing 4 posts - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.