Help with Qu USB streaming multitrack

Forums › Forums › Qu Forums › Qu general discussions › Help with Qu USB streaming multitrack

Tagged: , ,

This topic contains 11 replies, has 4 voices, and was last updated by Profile photo of Maris Brensons Maris Brensons 8 years, 4 months ago.

Viewing 12 posts - 1 through 12 (of 12 total)
  • Author
    Posts
  • 2014/05/01 at 6:51 am #39473
    Profile photo of SAM
    SAM
    Participant

    hi,help me to how setting from my pc windows to qu for play multitrack audio for virtual ,currenly im using cockos reaper trial.

    2014/05/01 at 9:52 pm #39496
    Profile photo of
    Anonymous

    Hi.
    Reaper works fantastic with QU
    The Trial version is the full blown version, just not yet paid for and Reaper is a very good price compared to other sotware.
    You need to follow the instructions for installing the A&H windows Asio drivers!
    Then to save you a lot of learning time if you look at this post [https://community.allen-heath.com/forums/topic/usb-pc-windows-question/page/2/#post-39405 ] there is a link to a simple reaper template at the Cockos forum under the name dhakNZ.
    Download the Reaper Template link and so long as you have Reaper set up and midi channel set on your QU16 centre “custom strip or layer” and you have the USB streaming set correctly per channel. It should work when you click on the reaper template.
    Remember its only a “basic start point for you”
    I use Reaper professionally

    cheers

    dave NZ

    2014/05/02 at 4:36 am #39508
    Profile photo of SAM
    SAM
    Participant

    thanks dave!
    i will try it..

    2014/05/02 at 4:38 am #39509
    Profile photo of SAM
    SAM
    Participant

    pic 2

    2014/05/13 at 2:38 pm #39725
    Profile photo of SAM
    SAM
    Participant

    Any idea?

    2014/05/13 at 2:43 pm #39726
    Profile photo of SAM
    SAM
    Participant

    Pic..

    Attachments:
    You must be logged in to view attached files.
    2014/05/13 at 8:30 pm #39733
    Profile photo of
    Anonymous

    Hi
    Its going to be a day before I can set up one of my QU with PC (windows) to have a look see.
    I didn’t take any pics unfortunately..
    I used the Hui protocol. Not Mackie for “PC WINDOWS”

    2014/05/13 at 9:51 pm #39734
    Profile photo of
    Anonymous

    ok
    Here are some pics for PC thats Microsoft windows
    good luck

    2014/05/13 at 9:53 pm #39739
    Profile photo of
    Anonymous

    and another 4 pics

    Hope this helps.
    Remember you need to midi map your channels
    If you want a midi map let me know

    dave NZ

    2014/05/14 at 3:16 am #39747
    Profile photo of SAM
    SAM
    Participant

    thx dave,hope so this will help me for figure this out
    so i need to change it to hui protocol?and run this setup.

    2014/05/14 at 8:54 am #39748
    Profile photo of Nicola A&H
    Nicola A&H
    Keymaster

    Hi Sam,

    so i need to change it to hui protocol?and run this setup.

    No, it looks to me as you are following the instructions for the DAW Control OS X driver (Mac only). There isn’t such a tool for Windows unfortunately. You can still get MIDI messages from the Qu but you’ll have to assign these manually (or try Dave’s template as a starting point), not via the Control Surfaces menu.

    Hope this helps.

    2015/12/18 at 3:01 pm #52799
    Profile photo of Maris Brensons
    Maris Brensons
    Participant

    DAW controll works from dhakNZ keymap, but how to make it bidirectional?

  • Author
    Posts
Viewing 12 posts - 1 through 12 (of 12 total)

You must be logged in to reply to this topic.