Graphic Eq

Forums Forums Qu Forums Qu troubleshooting Graphic Eq

This topic contains 2 replies, has 2 voices, and was last updated by Profile photo of Elvis Elvis 6 years, 3 months ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #44160
    Profile photo of Elvis
    Elvis
    Participant

    I have a Qu-24 and I thought that on each individual channel you could have the on board graphic eq, When I set up a compressor for a channel and my PEQ, I also would like to be able set up the Eq so I can pull down some of the frequency as well.
    Please Help

    #44162
    Profile photo of cornelius78
    cornelius78
    Participant

    The geq is only available on the mixes/groups/mains/mtx. It’s not available on individual channels. ATM All you can do is send a channel to a group, apply the geq to the group, and route the group to LR. If you’ve got spare inputs and don’t mind the latency, you can go out of the console and back in again via analogue and use the geq on the mixes. That said, if you can’t get the sound you want using a hpf, gate, 4-band peq and the compressor, I’d be re-thinking your mic choice/placement.

    #44169
    Profile photo of Elvis
    Elvis
    Participant

    I Thank You for your answer
    ElvisBob

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.