FX Routing to Busses?

Forums Forums CQ Forums CQ General Discussions FX Routing to Busses?

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • #114774
    Profile photo of vsthemvsthem
    Participant

    Haven’t pulled the trigger on this mixer yet, just playing with the app, trying to make sure that I can get this thing to do everything I need.

    Can anyone point me to where I route the FX to the outputs 1 through 6? All I can find are “FX Send Level” and “FX Level to LR”. Where can I control for instance, how much verb is going out to my monitor mixes?

    Thanks all!

    #114782
    Profile photo of vsthemvsthem
    Participant

    The manual says to go to processing, and then select the St in BT fx tab, but the fx aren’t showing up. It only displays ST IN, USB, and BT.

    Is there a way to get the fx to show up here? An option to check?

    #114784
    Profile photo of blaggersblaggers
    Participant

    Heres the screen for setting fx bus outputs

    Attachments:
    You must be logged in to view attached files.
    #114786
    Profile photo of vsthemvsthem
    Participant

    Here’s what my screen looks like.

    Does it not display because I’m not connected to a unit? Seems strange….

    Attachments:
    You must be logged in to view attached files.
    #114798
    Profile photo of KeithJ A&HKeithJ A&H
    Moderator

    @vsthem

    The FX channels will not appear and FX will not be able to be sent to outputs if the FX Unit has been inserted into a channel.
    But when in Shared mode, you can indeed decide where the FX Unit output is being sent.
    So yes, what you want to do will definitely be possible when connected to a unit.
    (and I’ve made a note to look into the demo show that is shown by default in CQ-MixPad)

    Thanks,
    Keith.

Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.