Dual rack me and Dante

Forums › Forums › ME Forums › ME general discussions › Dual rack me and Dante

Tagged: , , ,

This topic contains 1 reply, has 2 voices, and was last updated by Profile photo of Nicola A&H Nicola A&H 9 years, 3 months ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • 2015/01/13 at 10:49 pm #44504
    Profile photo of pfr
    pfr
    Participant

    For our church,We have a definite setup which is as follow.
    IDR 64 (master) , IDR 16 (slave) and we would like to use Dante in the slave, into an MU-1 -> ME1s.
    We only need 4 channels from the slave to be patched ( they will never change) and around 20 – 30 from the master, depending on the band. Does that work? And how do I setup the routing to the MU dante

    Sent from my iPad using Tapatalk HD

    2015/01/14 at 8:13 am #44505
    Profile photo of Nicola A&H
    Nicola A&H
    Keymaster

    Select the Master iDR in the Outputs screen, patch the required signals to Port B (ACE).
    Then select the Slave iDR, and patch to Port B (Dante) the required Slave signals AND the channels coming from the Master (ACE).
    The ME-U will take ch 1-40 from the Dante card and broadcast to all connected ME-1s.

    Hope this helps.

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.