Hey all, wondered if anyone had any suggestions for this problem we’ve got.
We have three IP6 units, connected to our DM32. One has lost the synchronisation but the other two are fine. I can add/remove the dodgy unit from the MixRack, but the connection icon stays yellow (assuming this means sync).
I can connect the dodgy IP6 to the Surface and all is fine, but our surface is off most of the time.
I tried connecting the IP6 to the network using the same cable as one of the working IP6s, but same problem.
I’ve tried static, dynamic and fixed IP addresses, but same problem.
The IP6 was working fine for 2 years up until a few days ago.
Any ideas?
Thanks in advance
.
.
