Distortion

Forums › Forums › SQ Forums › SQ troubleshooting › Distortion

Tagged: ,

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • 2019/06/10 at 12:12 pm #84489
    Profile photo of doandodoando
    Participant

    I have a problem with my SQ5 FW 1.4. I hear distortions from all channels, gain settings are OK, PAFL shows it’s safe in the green field, levels on the channel faders are on zero, PEQ slightly modified, level meters OK. Even on the SQ drive multitrack recording I can hear it. Someone can help? Suggestions?

    2019/07/01 at 12:57 pm #84950
    Profile photo of Anonymous
    Inactive

    Hi Doando,

    I once had that Problem on some channels. Metering was around zero, therefore green and ok – but signal was massively distorted.

    I found out I had the Trim turned up at around 15db, and this caused the distortion. It seems that the Trims"gain" isnt calculated into Metering.

    All the best, Phil

    2019/07/02 at 8:32 am #84968
    Profile photo of Alex A&HAlex A&H
    Keymaster

    Hi Doando,

    Please forward your show file to us in a ticket and we can take a look at why this is happening. support.allen-heath.com

    As Phil has said, a good place to look is the trim setting for each channel.

    Thanks!
    Alex

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.