Direct out setup

[photogguy]

Sorry for the basic question, but I haven’t used this board for 3 years, so…

I have a DLive 2500, and for the life of me can’t remember how to set up a mic input to a direct out.

I’m using a local input on the console to a local output on the console.

[photogguy]

…please and thank you.

[SteffenR]

The I/O screen should help…
Output Tab

[msteel]

And remember that direct out pickoff point (post fade, etc.) is set for all channels in the routing tab.

[photogguy]

Thanks!

[Author]

Posts