Copy All Settings from one SQ to Another

Forums Forums SQ Forums SQ general discussions Copy All Settings from one SQ to Another

This topic contains 4 replies, has 4 voices, and was last updated by Profile photo of mumu mumu 2 years, 1 month ago.

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • #105461
    Profile photo of Sunshy
    Sunshy
    Participant

    I am wondering if there is a way to copy all settings (routing/presets/etc.) from one SQ5 mixer to another. I would like to make a clone of one mixer so they are exactly the same.

    #105462
    Profile photo of Mike C
    Mike C
    Participant

    Yes….
    Save the mixer set up that you want as a scene, load that scene to a USB stick.
    Take that USB to the second mixer and load the scene from the USB into the mixer.

    Recall that scene and all the settings will be there.

    If you have multiple scenes look at saving it as show file.

    #105473
    Profile photo of KeithJ A&H
    KeithJ A&H
    Moderator

    Hi @sunshy,

    Mike is correct – in addition you can see the 3 different ‘levels’ of stored data here – https://www.allen-heath.com/media/SQ_ReferenceGuide_V1_5_0.pdf#page=57&zoom=auto,-361,573

    In brief
    Scene contains mix settings that can be changed instantly (e.g. scene to scene, song to song)
    Show contains 300 Scenes plus mixer config settings (mono/stereo mixes, sync options etc…)
    Console has one show loaded at a time and stores users, name and network settings locally (as they’re related to the physical mixer rather than a show)

    Cheers,
    Keith.

    #105490
    Profile photo of Sunshy
    Sunshy
    Participant

    Thank you both so much for the info.

    #105951
    Profile photo of mumu
    mumu
    Participant

    maybe helpful
    do not forget to “untic” all scene safes on the second console until that scene you want it is loaded

Viewing 5 posts - 1 through 5 (of 5 total)

You must be logged in to reply to this topic.