Connecting 2 SQ's

[RoB]

Hello,

i know that this topic exists a lot, but i can’t find the correct answer for me:

i want to connect an SQ5 (MON) and a SQ6 (FOH). If it’s possible i want to connect without stagebox because the band only has 13 inputs.

I’m able to rout the input from MON to FOH, this works. But how do i rout back the signal. I don’t know how i have to do the patch in the console and i can’t find help.

Thank You all for your help!!

RoB

[Tobi]

At FOH:
Go to “IO Patch”, then on the left side select “Outputs->Mix Out”. On Top select either SLink or IO-Port, as you have connected. Then send the Outputs back through the same link as you get the inputs.

At Monitors:
On the left side choose “Tie Lines->Slink (or IO Port, as you have connected)”. On Top choose “Local”. Then Tie Line together the signal you send from FOH to one of the local ports.

Best Regards,
Tobias

[Author]

Posts