Cat 6 usage

Forums Forums Qu Forums Qu general discussions Cat 6 usage

Viewing 9 posts - 1 through 9 (of 9 total)
  • Author
    Posts
  • #57754
    Profile photo of VOLCANOJEFFVOLCANOJEFF
    Participant

    Good day all.
    Searched a bit but not found too much reference.” Eurocable touring grade cat6 stp Data cable LK cat6 “. Any one with any experience with this? Will it perform for use as dsnake in place of cat 5 we normally talk about. Thoughts? Ideas? Good to use or not.

    #57755
    Profile photo of debzdoodledebzdoodle
    Participant

    I use GLS RJ45 Cat 6 cable with my D Snake and QU-PAC all the time with zero issues.

    #57756
    Profile photo of Anonymous
    Inactive

    If it handles Ethernet (100Mbit) then it should be fine.

    #57805
    Profile photo of tcworshiptcworship
    Participant

    I am getting ready to purchase the AR2412 to connect via dSnake to QU-24 board. Can I use CAT 6 instead of CAT 5? If so, any recommendations?

    Thanks

    #57818
    Profile photo of Anonymous
    Inactive

    As I said in the post above…

    If it handles Ethernet (100Mbit) then it should be fine.

    #57821
    Profile photo of debzdoodledebzdoodle
    Participant

    As I said in my post – I use the GLS brand of RJ45 and I have had no problems -Quality is very nice .

    #57823
    Profile photo of DanSDanS
    Participant

    Are the GLS Ethernet cables fairly flexible? They look a bit rigid and plastic from the photos.

    #57826
    Profile photo of AndreasAndreas
    Moderator

    If its this cable: GLS Audio RJ45 CAT6 Cable
    then I won’t expect too much flexibility since its a solid core.

    #57831
    Profile photo of debzdoodledebzdoodle
    Participant

    The GLS isn’t as flexible as a high end mic cable but it is about the same flexibility as my CBI cat 5 cable. Easy enough to run around and through obstacles on stage. I over/under them easily into a 9-10″ loop to store if that helps.

Viewing 9 posts - 1 through 9 (of 9 total)
  • You must be logged in to reply to this topic.