Bluetooth playback with direct monitoring (CQ18T)

[JM_D]

Hello!

So far very happy with my CQ18T, it’s a huge leap up from my previous hardware.
I’m a drummer, and one of the reasons for buying the CQ18T was that i wanted to listen to music while playing along, with all of it coming through my in-ears for practice.
But I’m having an issue when my headphones are in the front headphone jack (A/B). I’m able to hear the Bluetooth perfectly, but there are no drums.
I tried switching it around and putting my headphones in the Out-1 channel, then i could hear all of it, but the sound of the Bluetooth got weird. It lost Presence and had a strange stereo effect on it.

I hope there’s help to get 🙂

JM_Drums

[Anonymous]

Just check the setting of your headphone output to be on MAINLR, in CONFIG, OUTPUT tab.

[JM_D]

I did switch it around, but at MAINLR i never could hear my drums for some reason..

[Anonymous]

What kinda drum is it and how is it plugged into the CQ ?

[JM_D]

It’s a full kit, with 8 mics plugged into the mixer (Kick, Snare, etc.)

[G]

do you have your inputs set to analog?
Have you adjusted the gain on each input?
are you seeing metering on the inputs when you play?
are the faders up?

[JM_D]

The analog thing i gotta have a look into.
The inputs should be adjusted correctly as i can hear all my drums when i put my headphones in the Out-1 Channel.
Yes, I am seeing metering 🙂
And the faders are up 🙂

[Dor Seidel Thom]

Out Channels are Mono! TRS is here for symetric transmission not for Stereo. that could be the reason, your bluetooth sound get weird.

[Author]

Posts