Blank channel

Forums › Forums › SQ Forums › SQ troubleshooting › Blank channel

This topic contains 2 replies, has 3 voices, and was last updated by Profile photo of SteffenR SteffenR 3 years, 3 months ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • 2021/02/07 at 9:10 am #98660
    Profile photo of Martininoz
    Martininoz
    Participant

    I’m new to the SQ5. I have an unassigned Chanel and I can’t work out how to make it work. It’s not highlighted and has no information at all when you go into the settings. Any ideas how I sort this.

    2021/02/07 at 9:46 am #98661
    Profile photo of spevs
    spevs
    Participant

    I/O patch. Search channel on left hand column and assign. Or pre amp on screen. Box will say unassigned click and send your Chanel to where you want it.

    2021/02/07 at 10:30 am #98662
    Profile photo of SteffenR
    SteffenR
    Participant

    channels and strips are two different concepts
    if you have no information on a strip it is simply unassigned to a channel.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.