AUX 10

Forums Forums SQ Forums SQ troubleshooting AUX 10

This topic contains 1 reply, has 2 voices, and was last updated by Profile photo of SQuser SQuser 1 month, 4 weeks ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #119539
    Profile photo of Crials
    Crials
    Participant

    Hello, I’m new to both digital mixing and our new Allen and Heath SQ6 desk. I was able to connect two active monitors’ in parallel to AUX 10. I was able to control my volume through the SQ desk; however, this is not something that i do often. So i forgot how i configured these monitors through the SQ desk to include controlling the volume. Can you help me figure out how i may have configured the monitors to work on AUX 10?

    #119540
    Profile photo of SQuser
    SQuser
    Participant

    Aux 10 can be Stereo but also Mono.
    In any case, you have to patch the Aux 10 to 2 outputs under “I/O – Outputs – Mix Out”.
    Then you can control the volume of both outputs as usual using the Aux 10 channel fader.

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.