AMM update

Forums Forums Qu Forums Qu feature suggestions AMM update

This topic contains 1 reply, has 2 voices, and was last updated by Profile photo of funkcity funkcity 4 years, 8 months ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #58037
    Profile photo of Johannes
    Johannes
    Participant

    Please update AMM, with the option to insert AMM/Dugan post fader.
    It´s necessary to do this so you can easy with the faders set the balance of the mics and choose who should contribute to the gain pool in AMM, without to use mute. (You want not that mics off-stage shall contribute)

    All other consoles I have work with like Yamaha, Soundcraft, Digico use Dugan post faders.

    Thanks
    /J

    #58204
    Profile photo of funkcity
    funkcity
    Participant

    As Joannes says, this is THE preferred method of gain-sharing automixing.
    I recently updated firmware on a Yamaha board to be able to insert post-fader as suggested by the inventor.
    You should have the option to insert pre or post. Post will more accurately deal with differing
    voices, their timbre and loudness.

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.