all channels no signal

Forums › Forums › Qu Forums › Qu troubleshooting › all channels no signal

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • 2019/07/05 at 7:16 pm #85016
    Profile photo of infeligoinfeligo
    Participant

    There is a problem. The mixer hovered on the splash screen. Reboot. And on all channels no signal. If add gain 60, then just a little bit. Made a factory reset. Firmware updated. Through stagebox it works!

    It is not clear what to do (

    2019/07/05 at 7:29 pm #85017
    Profile photo of infeligoinfeligo
    Participant

    qu-32

    2019/07/05 at 11:30 pm #85022
    Profile photo of Mike CMike C
    Participant

    So inputs from the stage box works.

    Check in the pre amp input channel assignment that the channels are assigned
    to the local inputs.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.