Zed 436

Forums › Forums › iLive Forums › Archived iLive Discussions › Zed 436

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • 2011/03/15 at 10:42 am #22687
    Profile photo of Anonymous
    Inactive

    I want to Know if the Zed 436 works with any audio workstation (like cubase) or if only works with sonar, and if in may workstation i can acess to all parameters of the mixer, if i can record all channels individually to my workstation

    2011/03/15 at 11:13 am #27723
    Profile photo of StealthStealth
    Moderator

    Hi Grooveon

    Yes you can connect a ZED 436 to Cubase or Sonar.

    What do you mean by all parameters?

    No you cannot record all channels individually and simultaneously to the workstation. If you wish to do this i suggest you look at the
    ZEDR16 https://www.allen-heath.co.uk/zed/zedr16 or GSR24 https://www.allen-heath.co.uk/gsr24

    Hope this helps.

    Please note this is also the iLive forum.

    Here you can find lots of forum support for the ZED series of mixers.
    https://www.gearslutz.com/board/search.php?searchid=35147605

    Regards
    Sam

    2011/03/15 at 1:20 pm #27724
    Profile photo of Anonymous
    Inactive

    What i mean when i say “all parameters” is for example, if i want to record a band, if i can record all the mics individually while the band plays? (with the Zed 436)

    2011/03/15 at 1:31 pm #27725
    Profile photo of woutertwoutert
    Participant

    “No you cannot record all channels individually and simultaneously to the workstation.”

    2011/03/15 at 3:10 pm #27727
    Profile photo of Anonymous
    Inactive

    Ok, Thanks a lot

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • The forum ‘Archived iLive Discussions’ is closed to new topics and replies.