Headphones on IDR32

Forums › Forums › iLive Forums › Archived iLive Discussions › Headphones on IDR32

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • 2010/02/13 at 8:38 am #22263
    Profile photo of JoZeeJoZee
    Participant

    How do i use the Headphone port on the IDR32 with live editor?
    Thanks

    2010/02/13 at 1:25 pm #25185
    Profile photo of AlbinAlbin
    Participant

    Just the same as with the headphone port on the surface – there you can hear the signal thats pressed “pfl” for example.

    2010/02/13 at 1:39 pm #25186
    Profile photo of JoZeeJoZee
    Participant

    So you cannot rout it differentially?

    2010/02/13 at 9:20 pm #25189
    Profile photo of StixStix
    Participant

    If you want a headphone mix at distance from the IDR32 near the laptop then you will need to either extend over copper or use a set of wireless in ear monitors. Is that what you wanted to know by routing differently?
    Cheers

    Richard
    IDR48/T112

    2010/02/15 at 11:04 am #25200
    Profile photo of Lieven-DewispelaereLieven-Dewispelaere
    Participant

    JoZee,

    You can not route the pfl output on the surface differently than the one on the rack.
    It has been requested to accommodate FOH/monitor mixing on one rack with separate PFL for front and monitor. The only way you can do this now is to use two racks connected.

    regards Lieven

    T112/IDR48
    Save a tree, eat a beaver

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • The forum ‘Archived iLive Discussions’ is closed to new topics and replies.