IDR Expanders

Forums › Forums › iLive Forums › Archived iLive Discussions › IDR Expanders

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • 2009/11/13 at 8:21 pm #22198
    Profile photo of mjpruzinmjpruzin
    Participant

    Hello,

    I’m writing to clarify the use of IDR expanders with the Multi-out card. One of my links goes directly into an IDR-8 for DSP management of my various speaker zones. This only requires the use of the audio output to sync/slave clocks. I’m curious whether it is necessary to run the IDR link to sync the multi-out card to the IDR expander, and if not what is the function of this link? Sorry if I have missed the reasoning in my scanning of the literature, and thanks for your input.

    Regards,
    Jason

    M. Jason Pruzin
    Sound Designer/Engineer
    Arkansas Repertory Theatre

    2009/11/16 at 10:12 am #24892
    Profile photo of StealthStealth
    Moderator

    Hi Jason

    The DR-Link on the Mini Multi Out Module and Multi Digital out Card are used for sending metering data only to iDR-out + iDR D-Out front panel LED’s.
    The iDR8 has the ability to assign what is displayed on its front panel LED’s via System manager so the DR-link is not necessary when linking Mini Multi Out Module and Multi Digital out Card to iDR8.

    Hope this helps
    Sam A&H

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • The forum ‘Archived iLive Discussions’ is closed to new topics and replies.