[Jkurk1983Participant]

gcumbee…that does kill the effect from the Main LR, however it’s still the master fader for the track that controls the effect on that channel in the mixes.

So I’m narrowing it down. I have reverb set as FX1 for the input and Mix>return (Channel>return does the same thing) for the return. The control for the level of FX on a channel is being routed to that channels main LR fader. Like it’s Pre Fade. Even with Mix LR unassigned I still have to use the master fader to control the level of effect in the MIXs thus compromising FOH if its being used

[Jkurk1983Participant]

I’m sorry being new to this it’s easy for me to get confused.

This is exactly what I want to do right now:

I want to be able to add reverb to a vocal and perhaps an acoustic guitar. We’ll call it Channel 1 Vocal and Channel 2 Acst.

I want to add reverb to those channels in the Mixes for IEMS. I don’t want it to affect the FOH output for those channels if in use.

Hopefully that describes my situation pretty close.

[Jkurk1983Participant]

In FX1 all the channels are not lit for Pre Fade. They are lit for Pre Fade in Mix 9-10 section

[Author]

Posts