[frewenParticipant]

Can you tell me how to do this?

quote:

---

Originally posted by frewen

Thanks for the feedback. In this scenario, it seems that would require assigning output targets from the back panel of the efx rack. Can’t seem to make any changes to the output targets. Those are assigned to L and R and it won’t let us change it?

quote:

---

Originally posted by Stealth

Hi Frewen

In LCR Mode Stereo channels are sent directly to LR and not to C.

I recommend you use to mono channels, gang the 2 mono channels together except for Pan and then you will be able to use the pan on each channel to blend the mix between LCR.

Hope that helps

Regards
Sam A&H

---

---

[frewenParticipant]

Thanks for the feedback. In this scenario, it seems that would require assigning output targets from the back panel of the efx rack. Can’t seem to make any changes to the output targets. Those are assigned to L and R and it won’t let us change it?

quote:

---

Originally posted by Stealth

Hi Frewen

In LCR Mode Stereo channels are sent directly to LR and not to C.

I recommend you use to mono channels, gang the 2 mono channels together except for Pan and then you will be able to use the pan on each channel to blend the mix between LCR.

Hope that helps

Regards
Sam A&H

---

[frewenParticipant]

Jeff,
OK. Thanks, that gets me my effects to center. Bad news is I lose the Sub bus from the previous LCRS config. Help? Can I assign a new Sub buss. And I assume I lose individual channel assignment to sub? Which doesn’t bother me.

quote:

---

Originally posted by jefsound

If you use the “LCR+” mode, it adds a blend control for that purpose.

Have fun,

Jeff

---

[frewenParticipant]

Thanks all. Will give those a try.

[Author]

Posts