Tie-Lines for Monitor mixes ?

Forums › Forums › SQ Forums › SQ general discussions › Tie-Lines for Monitor mixes ?

This topic contains 3 replies, has 3 voices, and was last updated by Profile photo of Runepune Runepune 6 months, 3 weeks ago.

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • 2023/10/12 at 8:49 pm #115646
    Profile photo of Riker
    Riker
    Participant

    Hi, I am processing vocal channels on SQ-6 with EQ and compression for FOH, but I would like to send un-processed, or at least not compressed etc.. version of the vocal channel to the stage floor monitors. Is using Tie-Lines to “map” the vocal channel to the AUX channel the right way, or the best way, of achieving what I want to do ? I’m actually using AB168 on stage for all inputs, but same principle as a local input I’m guessing.

    Thank you 🙂
    Stephane

    2023/10/12 at 9:55 pm #115648
    Profile photo of RS
    RS
    Participant

    Read chapter 8.2 of the manual and see flowchart for the 4 possible pickup points for aux sends.

    2023/10/12 at 11:10 pm #115650
    Profile photo of Riker
    Riker
    Participant

    Got it.

    Thank you very much.

    2023/10/15 at 6:09 pm #115705
    Profile photo of Runepune
    Runepune
    Participant

    Though, most often the vocalist would like at least some compression on their voice. I’d give them that, and compress whatever more is needed on a subgroup.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.