Soft Control to change SignalGenerator

Forums Forums SQ Forums SQ feature suggestions Soft Control to change SignalGenerator

Tagged: 

This topic contains 1 reply, has 2 voices, and was last updated by Profile photo of Highflyer1953 Highflyer1953 1 month, 1 week ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #120342
    Profile photo of Chris
    Chris
    Participant

    I like to use a signal generator during events on my FOH pafl monitor. It helps me to quickly zone in on a troublesome frequency, if my analyzer or spectrogram can’t pick it up, but I could hear it by ear. Say a vocal feedback, or a nasty room mode on the bass Guit, etc.

    It would be really cool, to allocate a soft rotary to the SQ signal generator, to change the frequency/level of the sine wave and the button to mute the signal.
    It can also help to mute/unmute pink noise quickly when we’re doing system tuning, so I don’t have to navigate to the SigGen page every time.

    Your thoughts?

    #120354
    Profile photo of Highflyer1953
    Highflyer1953
    Participant

    Interesting request! Though not for me personally, SQ5, no rotaries!

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.