Qu Drive

Forums › Forums › Qu Forums › Qu general discussions › Qu Drive

This topic contains 2 replies, has 2 voices, and was last updated by Profile photo of KeithJ A&H KeithJ A&H 5 months, 4 weeks ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • 2023/11/21 at 1:22 pm #116804
    Profile photo of vtmn7777
    vtmn7777
    Participant

    Hi all. please tell me where does qu drive get its sound source from? how to understand how many db he took, is there an equaliser, etc.?

    2023/11/21 at 1:30 pm #116806
    Profile photo of vtmn7777
    vtmn7777
    Participant

    P.s. I would also like to hear with and without effect

    2023/11/22 at 8:28 am #116846
    Profile photo of KeithJ A&H
    KeithJ A&H
    Moderator

    @vtmn7777

    You can choose where the Qu-Drive records from as described in the user guide here – https://www.allen-heath.com/content/uploads/2023/06/Qu-Mixer-Reference-Guide-AP9372_10.pdf#page=54&zoom=auto,-214,844
    If using insert send, you will record a completely clean signal from each channel. If using direct out, it will follow your direct out settings (see pg38 and refer to the block diagrams at the end of the guide).
    The direct out can include some or all of the processing depending on your source point, FX returns (reverbs, delays and modulation) need to be patched separately if you want to record these alongside the individual channels.

    Thanks,
    Keith.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.