Monitor Main Fade Follow LR Main Fade?

Forums › Forums › Qu Forums › Qu general discussions › Monitor Main Fade Follow LR Main Fade?

Tagged: , , , ,

  • This topic has 5 replies, 4 voices, and was last updated 9 months ago by Profile photo of Anonymous.
Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • 2024/02/21 at 8:32 pm #119650
    Profile photo of HopeQU-16HopeQU-16
    Participant

    I know that the individual input faders for each monitor channel can be set to post-fader of the LR – main mix.
    My question is: On a Qu-16 can the Main Fader for a Monitor Channel be set to follow the LR Main Fader so when you adjust the main mix volume the monitor mix volume changes proportionally? In other words, make a Monitor main volume Fader “post” to the LR main volume fader.
    I hope that makes sense.
    Thanks,
    Lee

    2024/02/21 at 10:56 pm #119656
    Profile photo of GigaGiga
    Participant

    DCA ?

    Giga

    2024/02/23 at 1:33 am #119704
    Profile photo of HopeQU-16HopeQU-16
    Participant

    I am pretty green on setting up the Qu-16. Can a DCA be used to control a monitor main fader level?

    Lee

    2024/02/23 at 7:31 am #119709
    Profile photo of GigaGiga
    Participant

    Sure it can: https://www.youtube.com/results?search_query=qu+dca

    Giga

    2024/02/23 at 12:34 pm #119714
    Profile photo of Mike CMike C
    Participant

    I didn’t watch the videos but on the QU16 to access the DCA faders they need to be assigned to the custom layer and or use the QU Pao app.

    2024/03/22 at 4:44 pm #120632
    Profile photo of Anonymous
    Inactive

    Thank you very much

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.