is there a way to do a fade in/out with soft keys/scene recall

Forums Forums Qu Forums Qu general discussions is there a way to do a fade in/out with soft keys/scene recall

This topic contains 4 replies, has 4 voices, and was last updated by Profile photo of garyh garyh 5 months, 1 week ago.

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • #105900
    Profile photo of DJ
    DJ
    Participant

    Hey all, this is probably a amateur question, but: is there a way to do a program/scene/etc… change on the board to go from say “program opening settings” to “program closing settings”, but in a smooth transition, not a hard move. for instance: we have someone introduce from MIC 1, and they then throw it over to MIC 2, so i would want to have a way to execute a smooth fade down and up on the faders. This isn’t the actual use, just a very simple example to get the idea across.

    If not possible on the board, what software/midi might be able to?

    cheers

    #105919
    Profile photo of Scott
    Scott
    Participant

    Qu and SQ don’t have scene transition timers. This feature is only available on Avantis and dLive.

    #105934
    Profile photo of Mike C
    Mike C
    Participant

    Is it really that simple of thing you want to do with scene change, a cross fade between
    two input sources.

    #106244
    Profile photo of DJ
    DJ
    Participant

    Yes, but it looks like scott put a nail in that coffin, So either a total no-go, or see if can have a software control the board do achieve it

    #106260
    Profile photo of garyh
    garyh
    Participant

    The QU’s can be controlled with midi. Find a device or software that allows you to set up automation.

Viewing 5 posts - 1 through 5 (of 5 total)

You must be logged in to reply to this topic.