dLive/Superrack creating F/X Sends/Returns

[Hogan]

Im fairly new to dLive anyway I’ve been trying to figure out the way
you setup stereo f/x sends and returns.I’m stumped and I can’t find
any information on how to do it.

[Brian]

Have you read the DLive manual? (Found as the “DLive Firmware Reference guide” on the main A&H website – https://www.allen-heath.com/content/uploads/2023/05/dLive-Firmware-Reference-Guide-V1.9_2.pdf).

Are you trying to insert Waves SuperRack returns into a channel/buss or are you trying to use the build in FX on the DLive?

[Scott]

For Send/Return, route an aux out to I/O card, then return to a channel or channel pair by assigning the channel to be sourced from I/O card.

If inserting an effect, route the insert/return point to the needed I/O card.

[Hogan]

Thanks I’ll give it a try

[Author]

Posts