delay for aux

Forums › Forums › CQ Forums › CQ feature suggestions › delay for aux

Viewing 9 posts - 1 through 9 (of 9 total)
  • Author
    Posts
  • 2023/09/08 at 12:44 pm #114667
    Profile photo of rottmatrottmat
    Participant

    it woud be nice to have delay for the aux outputs for delayline speaker

    2023/09/12 at 11:08 am #114757
    Profile photo of Mat_TurraMat_Turra
    Participant

    +1 yes please – this would be very good to have as there are many applications for a mixer like this in a setting with delay speakers. Input channel delay would also be very useful too (especially for things like syncing audio to video playback).

    2023/09/12 at 12:39 pm #114761
    Profile photo of WurlitzerWurlitzer
    Participant

    + 1, please make this possible

    2023/09/12 at 5:22 pm #114777
    Profile photo of robbocurryrobbocurry
    Participant

    Not in front of an iPad now but I thought that was already on the app?

    2023/09/12 at 5:37 pm #114778
    Profile photo of Lee7Lee7
    Participant

    @robbocurry

    You have output delay on all out’s inc L&R.

    2023/09/12 at 5:43 pm #114779
    Profile photo of robbocurryrobbocurry
    Participant

    That’s what I thought:)

    2023/09/13 at 7:14 am #114797
    Profile photo of KeithJ A&HKeithJ A&H
    Moderator

    (for anyone who hasn’t found it and comes across this thread – it’s in the CONFIG / OUTPUTS screen when an output socket is selected 🙂 )

    2023/09/21 at 2:16 am #115020
    Profile photo of Mat_TurraMat_Turra
    Participant

    thanks Keith! Are there plans to add input delay on channel inputs?

    2023/09/21 at 9:54 am #115032
    Profile photo of KeithJ A&HKeithJ A&H
    Moderator

    @Mat_Turra

    I’m afraid not, this is a hardware (core-design) restriction, so not a case of simply implementing in firmware.

    Thanks,
    Keith.

  • Author
    Posts
Viewing 9 posts - 1 through 9 (of 9 total)
  • You must be logged in to reply to this topic.