Weird fader feedback

Forums › Forums › iLive Forums › Archived iLive Discussions › Weird fader feedback

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • 2010/03/20 at 10:49 pm #22293
    Profile photo of schaibaaschaibaa
    Participant

    So I setup the system for 8 fx returns and 8 fx sends.

    When I choose mix on FX 1-4 the rotary encoders set the levels for the send.

    WHen I choose mix on FX 5-8 the rotary encoders don’t do anything. I have to push faders — but sometimes when I push faders I get feedback from them like I shouldn’t push it. Very weird.. any help?

    2010/03/20 at 10:54 pm #25341
    Profile photo of schaibaaschaibaa
    Participant

    Ok, the fader feedback was due to the channels being ganged and I was sliding both… “DUH”.

    But I still don’t know why they are different (rotary vs. fader)

    2010/03/20 at 10:59 pm #25342
    Profile photo of schaibaaschaibaa
    Participant

    Just for future reference… I figured this out. This thing is so configurable. Anyway.. just go to Routing, hit SEL on the channel, and it will say “Send on Rotaries”

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • The forum ‘Archived iLive Discussions’ is closed to new topics and replies.