Multipoint audio monitoring in iLive

2012/07/20 in Tips and Tricks

I am sure most of you know this but I still meet people who dont; you can hear the audio signal at any point in a channel in iLive ┬áby pressing and holding down the green SEL key (including the on-screen versions) in the processing sections. The audio at that point in the path will then replace the current selection in the PAFL monitor busses. This can be handy for ‘tuning out’ unwanted triggering of drum kit mic gates [press+hold SEL in the gate sidechain window and then adjust the lo and hi filter points to pin-point what the detector is listening to].

Comments are closed.