UFX – Dual Mono

Forums › Forums › dLive Forums › dLive troubleshooting › UFX – Dual Mono

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • 2024/10/15 at 5:37 pm #126503
    Profile photo of blangford10blangford10
    Participant

    I am running the UFX Plugins but cannot get Dual Mono to work… It passes the Left side but not the right even tho it shows both inputs.

    TIA

    2024/10/15 at 5:46 pm #126504
    Profile photo of blangford10blangford10
    Participant

    FYI Just realized this is specific to the Vocal Tuner… I was hoping that it would allow 2 vocals to be tuned on one fx slot.

    2024/10/16 at 9:00 am #126538
    Profile photo of Jack_AHJack_AH
    Moderator

    The RackUltraFX rack supports dual mono, but only some of the units you can load into the rack support Dual Mono.

    As far as I’m aware the units that support Dual Mono use are Saturator and Amp+Cab Distortion. This should be in the Firmware Reference Guide Ultra FX appendix but it appears that it isn’t. We’ll look into getting that updated.

    2024/10/17 at 1:04 pm #126595
    Profile photo of ddff_lvddff_lv
    Participant

    And careful with Saturator in dual mono if inserting it into 2 mono grps. In some cases it might bring the desk down. I was told the case is being investigated.

    ddff

    2024/11/05 at 3:34 pm #127098
    Profile photo of BrianBrian
    Participant

    I’ve also tried using the Amp Simulator in “dual mono” mode and gotten very weird and undesirable results. I’m not sure “dual mono” is ready for prime time yet with UFX slots.

    I’ve submitted a support ticket with A&H about my situation…..

    2024/12/26 at 2:11 pm #128205
    Profile photo of ScotchyScotchy
    Participant

    Something has happened to dual mono on the regular FX rack as well. It won’t assign properly since version 2.0.

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.