[zman2206Participant]

Thanks – I’ll see what I can do. Glad to hear about mixing station. I’ve been using that app for years with the X32.

G

[zman2206Participant]

Scott,

We do have several users but only 1 user automatically loads a scene on login and that scene is the same one we use. I’ve seen compressor types change as well.????

G

[zman2206Participant]

Did this get resolved? I think we are having some of the same issues with PEQ, mix assignments, mix volumes, etc… reverting to ‘old’ scene values.

Thanks for any info you may have.

G

[zman2206Participant]

Seems like it IS possible. Why is this even an option? Oh well, a little education with the band and the sound techs and we should be OK.

[zman2206Participant]

Disregard this – magic happened. Turned on the board today and all with Show saving and Director loading is good. Hmmmmmmmm

[zman2206Participant]

I believe this may be an issue on the console writing the show. I seem to get the same errors while saving the show on the console. My working theory the saved show file is corrupt. Anyway to diagnose this?

[zman2206Participant]

Hard lesson to learn – thanks for the link. I’ll assume there is one for 1.10 or that one is coming soon. I’ll delve into the 1.03 for to start.

I appreciate your time.

G

[zman2206Participant]

Brian,

We have a combination of iPads using OneMix and Androids using Custom Control.

Custom control has 2 layouts controling mixes 1-8, and 9-15 (tabbed along the top) with 40 channels and bus master (tabbed along the bottom). Image attached. We have 2 logins band1 (mixes 1-8) assigned layout1, and band2 (mixes 1-15) assigned layout2

I checked every mix, mix bus master, and all 40 channels for each mix (took a long time). Every musician has their own device (iPads, iPhones, Android phones), either using OneMix or Custom control.

I think we may be saturating the WiFi. This week we limited the number of devices accessing the console and added a second WiFi access points for the sound monkeys (2 using MixPad). We didn’t have any reports from the band of IEM drop outs and the monkeys were happy.

Still trying figure out the root cause. The talent has been spoiled over the last few years by mixing their own ears so we reallt don’t want to take that away from them.

Thanks for the really good questions. More to come when/ if we find out.

Attachments:

You must be logged in to view attached files.

[zman2206Participant]

Are you saying that logging in to control the Avantis via WiFi using MixPad or Custom Control causes a scene load? I can see this when logging into the console surface. It would be catastrophic during a show. My iPad goes to sleep after a few minutes and logs out MixPad. I don’t recall seeing a scene load when I log back in. It would, I think, describe what is happening to the IEM mixes but no other mix, Main LR for example, seem to change.

I try some experiments this week and see what I can learn.

Thanks for the comments and questions.

[zman2206Participant]

I know right?

I think this week I’ll eliminate the custom control app and try using only the OneMix app for IEM bus mixes. I’ll set the iPads to not sleep or turn off the screen. I’ll also monitor the mix faders to see if they change or is it only an output level issue.

I need to find something – this is unacceptable. More to come………..

[zman2206Participant]

Excellent thought but we are pre-fader. My working assumption is that if the iPad control app or custom control app goes to “sleep” when it wakes up the buses are reset however I’m still investigating.

[zman2206Participant]

Thanks, that is the direction we will go.

[zman2206Participant]

AdamsFlys,

That’s what happening. We switched from a X32 to the Avantis and I was used to how the mute groups / Mute buttons worked. I was hoping there was a setting I couldn’t find that would give me the choice.

Mfk0815,

Thanks. I too would like the option. Maybe I’ll put it in the suggestion bucket at Allen Heath.

G

[zman2206Participant]

Thanks for the recommendation – I’ll go in that direction and see how it goes.

Do you know what happens if there is more than 1 layout assigned to a user that matches the other options (device, orientation, etc)?

G

[Author]

Posts