Forum Replies Created
-
AuthorPosts
-
2016/09/17 at 7:25 pm #58240
GOt it working with the CM MotorMix on the HUI settings… Only Volumes and mutes. Good enough for me for now.
2016/09/17 at 7:19 pm #58239The CM Labs Motormix worked as far as mute and volume. At least I have that. On the first 8 channels…
I normally only use it on fade out automation…
2016/09/16 at 4:13 am #58221presonus, already had it. not nearly as clean as a qu… and no daw integration
2016/09/16 at 1:09 am #58217it doesnt work on either of my daws with sonar x3. i had a mackie controller that worked. now i have nothing. how can i troubleshoot?
btw i loved the webinar. i cant wait until i get this ffixed and it works…
2016/09/16 at 12:04 am #58216I couldnt get it to work with sonar x3 either. i got the drivers installed, and got the notification light blinking. set up my qu24 to have the controls, and all. set up the mackie controller settings up, no response. i even HAD a mackie control i sold cause this was supposed to work…
what can i do to help troubleshoot???
2016/07/23 at 11:29 pm #57327Crickets?
Geeze, I purchased a qu24 cause of the announcement and sold my Mackie control surface already.. I feel dumb.
2016/06/30 at 8:56 pm #56912Yeah one would think a usb to midi device driver shouldnt be a huge deal, when even android can do it over wifi…
2016/06/30 at 2:07 pm #56903I put in a ticket and they said engineering had trouble with the midi driver and kernel mode. I told them i am a windows programmer and could i help troubleshoot and begged him for the beta. They said no. He insisted they are working on it…
I have a qu32 in wrir.org and just purchased a qu24 for my own studio because of the announcement. Do i need to return it?
2015/07/26 at 1:08 pm #49500So I routed the Talkback to Mix2. Then I took a XLR and looped MIX2 to CH27. Then I muted CH27 in LR but had to turn up the volume. Then I could get the talkback in the ME-1’s. Boy talk about running around your arse to get to your elbow…
2015/07/26 at 12:34 pm #49495I’ve double checked the QU-32 and under I/O Patch, there is dSNAKE Outs and Monitor outs on separate screens.
The dSNAKE has mixes, the Monitor ONLY has INS. Do I really need to loopback the MIX1 out into One of the INS to make this work? WTF?I mean we just spent thousands and it can’t even route a signal?
2015/07/24 at 7:14 pm #49468How can you route Mix1 to ME-1? It only seems like CH1-32 is available, along with only the other ins. No Outs.
2015/04/20 at 8:39 pm #47219Which version of QU drivers and Sonar are you using?
2015/04/20 at 6:42 pm #47212I get a different error. 10 Device Driver not started, and the A&H applet says no device present. WHen I reboot my system It never recognizes the QU32, so I have to uninstall the Drivers, plug the QU32 into a new USB port, and reinstall the drivers, and it works about 40% of the time. I have to repeat 2 or 3 times sometimes. I never turn the equipment off at this point. I bought a new Shielded Gold Connector USB cable, and have tried all USB ports on my ADK workstation. So I am thinking about buying a ePCI USB 3.0 card (to offload the processing from the CPU). ANyone else tried this?
I’ve tried all drivers with the same exact results…
-
AuthorPosts