Forum Replies Created

Viewing 15 posts - 541 through 555 (of 560 total)
  • Author
    Posts
  • #24865
    Profile photo of Wolfgang
    Wolfgang
    Participant

    – screen:
    I missed a good overview for the values of the dynamics in more than one channel

    – DSP:
    a sharper lo-cut, more than 12dB/Oct (18dB?)

    – T-surfaces:
    less reflections from the desk lamps on the T-surface

    – softkeys:
    a “loaded scene + 1 recall” function

    #24703
    Profile photo of Wolfgang
    Wolfgang
    Participant

    make the buttons in the iLive screen a little bit bigger, than we don´t need a stylus or bigger screens – only our fingers! [:)]

    this is the simplest way to become a better operability

    (the “bad english-service” from germany)

    #24635
    Profile photo of Wolfgang
    Wolfgang
    Participant

    please compare the iLive with PM5D, not with LS9!
    that´s unfair, it´s another league…

    #24613
    Profile photo of Wolfgang
    Wolfgang
    Participant

    yes, the offline setup has the same setup as the hardware.
    i have send my file to Markus Sinsel from A&H Germany.

    #24529
    Profile photo of Wolfgang
    Wolfgang
    Participant

    good to read this, it was my feeling too.
    but i don´t have a directly compare

    (here is the “bad english service” from germany[:D])

    #24528
    Profile photo of Wolfgang
    Wolfgang
    Participant

    touchscreen:
    after some jobs in this summer with the sun directly in the display, i think a brighter touchscreen is desirable.

    i know this is a problem of all digital desks, but A&H can be the first company who eliminate this problem with “Sun readable TFT Monitors”? ;-)

    (here is the “bad english service” from germany[:D])

    #24527
    Profile photo of Wolfgang
    Wolfgang
    Participant

    yes, this card is available.
    it works in my iDR48 without problems.

    but i can give you only the name of the german dealer…[8D]

    (the “bad english service” from germany[:D])

    #24412
    Profile photo of Wolfgang
    Wolfgang
    Participant

    quote:


    Originally posted by Lieven Dewispelaere

    quote:


    Originally posted by Wolfgang

    Gain on Rotarys over “ALT VIEW”?
    I think the better Logic is to make this over the button “ROTARY SHIFT”


    If you use the SUB mode you already need the rotary shift to send signal to the sub out.


    no, I don´t use the SUB mode.
    in “LR SUB” mode I can´t send a single signal in the SUB, when I route this signal over a subgroup, not directly in the mix.
    therefore I use the normal “LR” mode and use an normal Aux to send the signal to the subwoofer.
    when i don´t use the SUB mode ,I got two more Aux-sends…
    and now the better way for me is to use the ROTARY SHIFT button [8D][:D]

    #24394
    Profile photo of Wolfgang
    Wolfgang
    Participant

    Gain on Rotarys over “ALT VIEW”?
    I think the better Logic is to make this over the button “ROTARY SHIFT”

    now I use iLive over 30 jobs and I see a simple Problem:
    the touch-buttons in the touchscreen are a little bit to small for big fingers ;-)
    I look at the designs, there is enough place to make it a size larger. only make it a little bit higher, that´s enough.
    this can help to make the control faster and safer!

    touchscreen again:
    in the routing screen we can select the Aux-send signal source (…POST HPF, POST EQ, POST DELAY …).
    this drop down menu is very small and not easy to handle with your finger!
    can you bring this as a quick-menue – like the channel-naming?

    sorry for my bad english, I hope you understand.

    #24344
    Profile photo of Wolfgang
    Wolfgang
    Participant

    I know this effect.
    i´m working with XP pro…

    #24327
    Profile photo of Wolfgang
    Wolfgang
    Participant

    and for germany:

    – an Markus Sinsel, der immer fleissig am Telefon hängt und selbst von den unmoeglichsten Fragestellungen nicht aus der Ruhe zu bringen ist!

    Danke![:D]

    #24282
    Profile photo of Wolfgang
    Wolfgang
    Participant

    I use the stereo-matrix to send the mastersignal to the PA. this matrix contains the EQ setting for the PA.
    the master has flat EQ and is now ready to record ;-)

    – sorry for my broken english –

    #24281
    Profile photo of Wolfgang
    Wolfgang
    Participant

    hi.
    I use a different user to prevent this mistake in live-situations!
    this user has limited functions.

    the stereos or the bus-setup can only changed by the administrator-user, and i use this profile only during the soundcheck ;-)

    -sorry for my broken english-

    #24265
    Profile photo of Wolfgang
    Wolfgang
    Participant

    can I have a “dynamicEQ”, maybe as a FX??[8D]

    #24237
    Profile photo of Wolfgang
    Wolfgang
    Participant

    I renew my suggestions, but after the 1.42 now the list is a little bit smaller: ;-)

    – dynamics sidechain: self key´d pre/post EQ, and from other channels/mixes
    – multi-channel gain reductions overview, as meters in one screen (I called this the “dynamics overview”)
    – output-limiter POST-fader
    – RTA level adjust
    – easier “0”-position for single EQ gains (PEQ)
    – gate with expander-function
    – faster scene memory

    new effects:
    – frequency shifter
    – distortion ;-)

Viewing 15 posts - 541 through 555 (of 560 total)