[WassingueParticipant]

I had a few drops, with the DVS which was connected to the DANTE card of the MixRack (I/O port 1).
The problem was solved by setting the dLive clock on the DANTE card and assigning it a frequency of 48kHz.
In the Dante Controller, the master clock is fixed on the DANTE card.

all IP addresses are assigned automatically, no fixed IPs in my network.

[WassingueParticipant]

Same tip like @runes.
I’ved recorded 4 scenes with 4 illumination presets and recall filters only:
– hightest light for outdoor show
– hight light for live concert
– low light when people are behind me
– very low light for theater mode

But be carrefull when update firmware because the filter’s presets can change !

[WassingueParticipant]

+1

[WassingueParticipant]

+1 and an option to flip beetween 2 states, not only “on/off”. 😉

[WassingueParticipant]

+1 !

[WassingueParticipant]

Yes Steffen, that’s right !
And same way to bypass the SRC inputs.

Thank you very much for the quick reply.

[Author]

Posts