Forum Replies Created
-
AuthorPosts
-
2017/10/18 at 7:10 pm #65715
It was first noted in the 1.2 Software update manual. Available here:
LFE is Low Frequency Effects, basically, the .1 of 5.1 surround. Divergence is C vs. LR.Attachments:
You must be logged in to view attached files.2017/08/12 at 10:22 pm #64786It would be nice if it was optional too Midi Guy. For us, my DCAs, AUXs, and most FX don’t change from week to week but my inputs do. Every time I recall a certain vocal it’d be nice to know that its routed to the right DCAs and AUXs.
2017/08/12 at 10:10 pm #64785I’m not in front of my setup right now but we dealt with the same issue and fixed it by creating smaller channel ranges in the SoundGrid setup. Waves channels 1-72 go back and forth between the s7000 and Tracks live while Waves channels 73-128 go back and forth between the s7000 and the SoundGrid. This lets everything work immediately when flipping between RECORD and VIRTUAL SOUNDCHECK.
2017/08/12 at 8:09 pm #64784Be a great feature request if it isn’t already there. There’s a lot of wasted space and potential on the higher resolution externals.
2017/08/12 at 8:08 pm #64783It seems like solution 1 is the best way. We do this with vocal inputs weekly, not to create a group for IEMs but to allow us to effect the vocals in the house mix differently without distracting the vocalists.
I know you don’t like it because of the channel count, but as you stated, you have 128. That’s a huge number and short of having a separate monitor desk, I feel like it IS the way to do it and fairly standard.
That being said, it is easy for me to also think: “A&H could just add a couple lines of code to let AUXs and Matrices show up on One Mix.”
2017/06/06 at 2:53 pm #63725This, and really almost all routing would be helpful in the overview library save feature. DCA routing, Aux and FX sends need to be added.
Sent from my iPhone using Tapatalk
2017/05/29 at 1:35 am #63632You didn’t save it wrong. There are a handful of things that would make a lot of sense to save in the input library. (Onboard inserts, routing… channel name)
Sent from my iPhone using Tapatalk
2017/05/29 at 1:30 am #63630We ran a rehearsal and two services on it this morning. Some lag in first time screen selections but no issues.
Sent from my iPhone using Tapatalk
2017/03/31 at 3:33 am #62476There is a good selection of I/O cards that would let you do this too. You would only lack individual gain control… but you wouldn’t have that with the DM64 shared either.
With two Waves3 cards you could do 128×128 at 96.
2017/03/30 at 3:33 am #62461Agree, the DYN8, and especially the EQ could use some tweaking to make them a little easier to adjust.
2017/03/30 at 3:31 am #62460While not all A&H official, there are a lot of videos on YouTube.
Regarding the libraries… those exist already, unless I’m misunderstanding you.
2017/03/22 at 6:08 pm #62288@steffen those are certainly valid ways to work around the challenge I face…
but I’d rather then just tick box that allows channel names to be recallable. THAT would be far quicker and simpler… and I don’t understand why it wouldn’t be desired by many.
2017/03/07 at 12:00 pm #61894Nicola you definitely understand my position. Thanks.
2017/03/07 at 2:37 am #61885@bolupona, I have a dLIVE and the phone call I placed was in effort to find, what I assumed to be, an obvious setting somewhere to fix what I thought was wrong… no setting existed.
2017/03/07 at 12:51 am #61881I spoke on the phone with A&H’s systems integration guy and he confirmed that the software was programmed that way. DCAs are mute groups in essence.
Submit feature requests!
-
AuthorPosts