[ThomasL]

I know about the logic behind it, but as I can gang all other parameters – why not the (internal) Inserts? Or – as in a lot of other desks – just link the two “machines” working in neigbouring busses?

[ThomasL]

+1

[ThomasL]

If this would work in combination with IP8s etc. it would be a perfect solution for a lot of installs.

[ThomasL]

+1

[ThomasL]

alternatively you can put the desk in the corner and wait until it may be solved during the next update.

I did exactly that, as long as there are only DIY-Solutions the QU16 or QU24 will remain the weapon of choice for small monitor-setups 🙂

[ThomasL]

Sorry, but the option to have a PAFL-Bus as the source for a listening Wedge for example is not a fancy thing to ask, it’s essential for everybody who has to work with the console. And really, I can’t understand why this hasn’t been implemented yet.

[ThomasL]

When having an internal FX-Machine, this is a must. I edited all four machines to my liking, before I spotted, that the Save-Button is not working. Not good, since I work (like most people I guess) with a mixture of “Standards” and “Specials” for my bands.

[ThomasL]

What I experienced was the following. When tapping the tempo, for example a 1/4 Beat, on a soft key, the LED of the Key needs 4-8 Taps (depending on Tempo) to get to the right Tempo. So your optical “delay control” is really running behind your normal workflow. This is pretty annoying since I’m used to the iLive-Delay where this is no issue at all.

Regards,
Thomas

[ThomasL]

I recently got the recommended WD Elements Drive with 500G. It works perfectly so far and is as far as I know, at least in germany, the best value for money thing out of the recommended hard disks.

Regards,
Thomas

[ThomasL]

I would like to have some matrix busses on the QU – and I thought, that one possible way to achieve that without the need to redesign the Hardware would be the ability to switch busses between Auxes (fed from Inputs) and Matrix (fed from other busses). Sorry for the poor english 🙂

[ThomasL]

All iLive-Systems in SingleRack-Mode can handle 64 Inputs and 32 Mixbusses. BUT the Direct-Outputs of the Inputs are separatly available. So Yes, you can record all 32 Inputs of your iDR32

Regards,

Thomas

In Use & For Rent
iLive T112 / iDR48
https://www.lange-ohlemeyer.de
https://www.lange-ohlemeyer.de/blog

[ThomasL]

Hey there,

we had the same issues. We had our screen changed by A&H Service – no more problems since then.

Regards,

Thomas

In Use & For Rent
iLive T112 / iDR48
https://www.lange-ohlemeyer.de
https://www.lange-ohlemeyer.de/blog

[ThomasL]

I would strongly appreciate this. A T144 or T176 in combination with an iDR64 would make the system an even bigger winner.

Regards,

Thomas

In Use & For Rent
iLive T112 / iDR48
https://www.lange-ohlemeyer.de
https://www.lange-ohlemeyer.de/blog

[ThomasL]

Hey BCProduktion,

the cheapest way – you got 8 Outputs on your R72 (4 x TRS, 2 x Phono, 1 x SPDIF (Stereo) – use them. The second way would be to buy a MMO-Card and some cheap ADAT Extender like the Behringer ADA8000. The third would be renting an xdr16 and an ACE-Card for this Tour.
But always consider, that time moves on. I wouldn’t buy an idr16 if I had tours coming up. With an idr32 you have the ability to do twice the In- and Outputs – and the price isn’t THAT high. Just consider it. If you have the Outputs available – you find ways to use them
Regards,
Thomas

In Use & For Rent
iLive T112 / iDR48
https://www.lange-ohlemeyer.de
https://www.lange-ohlemeyer.de/blog

[ThomasL]

DCA-Mute is unlike the classical analogue VCA-Mute. With the DCA-Faders you only affect the faders of the channels assigned to that group. With the Mute-Button you affect the whole channel as one, including all Busses (Group, Aux, FX) this Channel may be mixed to.

Regards, Thomas

In Use & For Rent
iLive T112 / iDR48
https://www.lange-ohlemeyer.de
https://www.lange-ohlemeyer.de/blog

[Author]

Posts