[TomParticipant]

This “problem” is only in this screen and only in the description of mix out, in any other screen the problem doesn’t present.

[TomParticipant]

Hi, Keith
no the problem is present with 1.5.3 and 1.5.4 downloaded now.

[TomParticipant]

Hi Keith,
Thanks for the reply, I’ve just reinstall the firmware but this evening I’ll try another and comunicare in forum the result.

Thanks
Tom

[TomParticipant]

This is photo

Attachments:

You must be logged in to view attached files.

[TomParticipant]

Thanks I try with sq7 linked to sq6 and share out of sq6 and is ok.

Many thanks ioTon, in my old gld112 I had dante and the tie lines are still being studied. You have solved a fundamental question. Thanks thanks thanks.

[TomParticipant]

Thank’s a lot for the reply.
So if i use a dx168 linked to another dx168 linked to sq6 monitor desk, and in sq6 desk i bought another slink card linked to sq7 FOH desk, i can use from sq7 the out of any dx168? this is possible with tie lines?

Sorry, but in tie lines pages of sq7 how acknowledge the out of the dx168 connected to sq6?

Thank’s
Tom

[TomParticipant]

Just do it… Thanks for the reply, it is my carelessness!!!

[TomParticipant]

Sorry,
I found now that the audio sync on gld was set to internal and sq on i / o card. Now I have also set GLD on slave option card and now it seems to have no problems, I update you on the problem.

[TomParticipant]

Sorry not possible

[TomParticipant]

Setup/mixer config/input…
and select stereo

[TomParticipant]

you have 48 channel and you can assign one or more ip to one source.
but gain share.
Eq dyn and assign where you want.

[TomParticipant]

Thanks Scott… 😉

[TomParticipant]

ok now work but i had to use the first time dante controller…
the next time is ok or i must obligatorily reuse dante controller for correct working?

[TomParticipant]

I’m waiting for return warranty replace cable of touch display… Mi I hope fine!!! One month without mixer 😢

[TomParticipant]

sorry, I meant … the mixer with a frizzed display is unusable.

[Author]

Posts